Mis estimados todo mundo se orina fuera de la bacinica, yo intenté con todos los conocidos, tengo un iPod Touch 2g, que ya trae el 2.2.1, lo adquirí el sábado y desupués de probar toda la tarde, con los del Dev-Team, y otrs más nomás no pude y ayer domingo rascandole en la internet encontré "Voltage" y aqui les va el tutoríal, está en inglés, espero no violentar alguna regla del site y del foro, pero también espero que tengan un poco de compasión hacía mi. Realicé el jailbreak con Voltage y no hay necesidad de meter ningún comando ni nada extraño, todo lo hace el programita, pero como todo ahora en el iPod Touch 2g, pues aún no se puede apagar, hay que dejarlo solo en hibernación. el Voltage trae su propio Boot también y a la primera que lo hice, salió sin errores ni problemas.
Auí les dejo la dirección:
http://www.iclarified.com/entry/index.php?enid=3033
Y también el Tuto,
Saludos de El Sanntos.
iPod touch | How to Tether Jailbreak Your iPod Touch 2G (Windows) Saturday, 21st February 2009, 11:02 pm This entry needs translation. To help us and submit a translation please click
here
These are instructions on how to tether jailbreak your iPod Touch 2G using Windows and Voltage. This is a preliminary release of redsn0w from the iPhone Dev-Team. It is not supported in anyway and may void your warranty or brick your iPod.
After performing the jailbreak your iPod touch 2G will not be bootable without assistance from a tethered computer. Unless you really need a jailbreak we suggest waiting till the iPhone Dev-Team releases an untethered jailbreak.
Step One
Create a folder called Pwnage on your desktop and download Voltage into that folder.
-
Voltage
Step Two
Double click the Voltage archive to extract it. Note*: You may need WinRar installed to do this.
Step Three
Double click the extracted
Voltage folder and double click to launch
Voltage - Jailbreaker.exe
Step Four
Voltage will launch and present you with three requirements for jailbreaking.
Click
Begin Download to start downloading the iPod Touch firmware ipsw.
Click to
Save to save the firmware file to your hard drive.
When asked where to save the file you can place it in the Voltage directory.
Step Five
If you are using Vista you must follow these steps to continue. If you are on Windows XP you can skip to Step Six.
Double click to open the
Install_Files folder from the Voltage folder you already have open.
Right click the
lib-win32-filter-bin-0.1.12.1.exe file and select
Properties from the popup menu.
Click to select the
Compatibility tab.
Check the
Run this program in compatibility mode for: box. Make sure
Windows XP (Service Pack 2) is selected from the dropdown then click the
OK button.
Step Six
Click the
Begin Install button to launch the LibUSB installer.
Follow the prompts to install LibUSB on your computer.
Step Seven
Click the
Begin Install button to launch the C++ Installer.
Follow the prompts to complete the C++ installation on your computer.
Once the installation has completed click the
Next Step button at the bottom right of the Voltage screen.
Step Eight
Click the
Select button to select the IPSW file you downloaded.
Navigate to the Voltage folder and select the iPod touch 2.2.1 firmware file then click the
Open button.
Step Nine
Now we will make a custom firmware ipsw. Click the
Make IPSW file to continue.
A command prompt window will open to display the progress. It will close when the custom firmware ipsw is built.
Click the
Next Step button to continue.
Step Ten
Now we need to put the iPod touch into DFU mode. The easiest way to do this is to plug the iPod into the computer then hold both buttons down for 10 seconds. Release the power button and continue holding the
Home button for another 10 seconds.
To confirm the iPod is in DFU mode click the
Check DFU Mode button.
Once in DFU mode click the
Next Step button to continue.
Step Eleven
You will now be able to patch the device. Click the
Patch Device button.
Step Twelve
Once the device has been patched it is time to restore to your custom firmware using iTunes.
iTunes will have detected an iPod in recovery mode. Click
OK to close the dialog box.
Hold down the
Shift key and click the
Restore button.
A popup window will open asking you to locate the firmware to restore to. Select the
Custom_Restore.ipsw file from the Voltage/JB_Files folder then click the
Open button.
Step Thirteen
Once the firmware has been restored successfully go back to Voltage and click the
Next Step button.
You will need to place the iPhone into DFU mode again. The easiest way to do this is to plug the iPod into the computer then hold both buttons down for 10 seconds. Release the power button and continue holding the
Home button for another 10 seconds.
To confirm the iPod is in DFU mode click the
Check DFU Mode button.
Click the
Next Step button to continue.
Step Fourteen
We will need to patch the device again so that it will boot up. Click the
Patch Device button.
Now to actually boot the device click the
Boot Device button.
The iPod touch will now boot and you will see Cydia and Installer on your SpringBoard.
FUTURE BOOTS
If your iPod gets powered off in the future you can use the
Voltage - Booter.exe program to reboot the device. There is a semi-tethered solution to jailbreaking which if your iPod gets powered off will reboot it in unjailbroken mode. We will be posting a tutorial on how to do this shortly.
THANKS
A big thanks go to CalebMingle for creating Voltage.
Bien, les mado saludos.
