como borrar contraseña cmos de hp mini 110-1016la

HGT

Bovino adolescente
#1
hola cuates del foro alguien sabe como borrar la contraseña de CMOS de una hp mini 110-1016la preste mi laptop y o sorpresa... ya adivinaran lo k le dije...pero necesito ayuda para volarla clave y poder entrar al BIOS y sistema..gracias por las sujerencias.. pero ya la desarme y le quite la pila y nada sigue igual...k mas puedo hacer... ayudaaaaaaaaa porfavoooooooooooooooooooor....:eolo:sera k ya valio mi MINILAP...Y DE NUEVO GRACIAS DE TODAS MANERAS...
 

chucho_666

Bovino de la familia
#3
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE: These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 44).
5. Remove the real-time clock (RTC) battery (see RTC battery on page 66).
6. Wait approximately 5 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.
 

HGT

Bovino adolescente
#7
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE: These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 44).
5. Remove the real-time clock (RTC) battery (see RTC battery on page 66).
6. Wait approximately 5 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.
GRACIAS ya INTENTE ESO... pero no funciono...
 
Arriba