Hola!

Registrándote como bakuno podrás publicar, compartir y comunicarte en privado con otros bakuos :D

Regístrame ya!

como borrar contraseña cmos de hp mini 110-1016la

  • Autor de tema Autor de tema HGT
  • Fecha de inicio Fecha de inicio
HGT

HGT

Bovino maduro
Desde
22 May 2007
Mensajes
122
hola cuates del foro alguien sabe como borrar la contraseña de CMOS de una hp mini 110-1016la preste mi laptop y o sorpresa... ya adivinaran lo k le dije...pero necesito ayuda para volarla clave y poder entrar al BIOS y sistema..gracias por las sujerencias.. pero ya la desarme y le quite la pila y nada sigue igual...k mas puedo hacer... ayudaaaaaaaaa porfavoooooooooooooooooooor....:eolo:sera k ya valio mi MINILAP...Y DE NUEVO GRACIAS DE TODAS MANERAS...
 
las mujeres :punzadita: y las compus no se prestan.;)

quitando la pila un par de minutos deberia funcionar.
 
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE: These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 44).
5. Remove the real-time clock (RTC) battery (see RTC battery on page 66).
6. Wait approximately 5 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.
 
pus a las lap solo kitandoles la pila no se como venga pero me imagino k viene soldada hay k desoldarla y después volverla a soldar y ya keda
 
chucho_666 dijo:
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE: These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 44).
5. Remove the real-time clock (RTC) battery (see RTC battery on page 66).
6. Wait approximately 5 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.
Click para expandir ...
GRACIAS ya INTENTE ESO... pero no funciono...
 
Debes iniciar sesión o registrarte para participar.
Volver
Arriba